CISCO 3620 en serveur DIALOUT avec carte MICA.

[leschas]

Bonjour à tous,
Je voudrais réaliser un serveur DIALOUT avec un routeur CISCO 3620.
sh ver du routeur:
cisco 3620 (R4700) processor (revision 0x81) with 27648K/5120K bytes of memory.
Processor board ID 24372621
R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
Channelized E1, Version 1.0.
MICA-6DM Firmware: CP ver 2730 - 5/23/2001, SP ver 2730 - 5/23/2001.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
14 Serial network interface(s)
12 terminal line(s)
1 Channelized E1/PRI port(s)
DRAM configuration is 32 bits wide with parity disabled.
29K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
4096K bytes of processor board PCMCIA Slot0 flash (Read/Write)

Si quelqu'un connait la configuration
Merci d'avance.