Probléme vpn 3020 vers Checkpoint

[smachy]

Bonjour,

Je tente une cnx vpn entre un 3020 concentrator et un checkpoint, la phase 1 monte bien mais pas la phase 2. Mes paramétres IKE et IPSEC sont bien en phase, voici ce que donnent les logs, si qq a une idée :

34804 04/08/2008 15:34:00.850 SEV=4 IKE/119 RPT=22724 151.92.12.203
Group [x.x.x.x]
PHASE 1 COMPLETED

34810 04/08/2008 15:34:00.890 SEV=5 IKE/25 RPT=34122 151.92.12.203
Group [x.x.x.x]
Received remote Proxy Host data in ID Payload:
Address 192.168.183.97, Protocol 0, Port 0

34813 04/08/2008 15:34:00.890 SEV=5 IKE/24 RPT=910 x.x.x.x
Group [x.x.x.x]
Received local Proxy Host data in ID Payload:
Address 192.168.185.1, Protocol 0, Port 0

34816 04/08/2008 15:34:00.890 SEV=5 IKE/66 RPT=22253 x.x.x.x
Group [x.x.x.x]
IKE Remote Peer configured for SA: L2L: VPN-FIAT-SAVA

34818 04/08/2008 15:34:00.930 SEV=5 IKE/68 RPT=586 x.x.x.x
Group [x.x.x.x]
Received non-routine Notify message: Invalid ID info (1

34819 04/08/2008 15:34:32.890 SEV=4 IKEDBG/97 RPT=17545 x.x.x.x
Group [x.x.x.x]
QM FSM error (P2 struct &0xd187020, mess id 0x142e27e)!

34820 04/08/2008 15:34:32.890 SEV=6 IKE/0 RPT=9977 x.x.x.x
Group [x.x.x.x]
Removing peer from correlator table failed, no match!

34821 04/08/2008 15:34:32.890 SEV=6 IKE/147 RPT=4630 x.x.x.x
Group [x.x.x.x]
Terminating tunnel to Hardware Client in network extension mode,
deleting static route for address: 192.168.183.96, mask: 255.255.255.240

Merci de votre aide.